|
Phone(s):
416.752.1560
|
1255 Kennedy Road
Toronto Ontario M1P 2L4 |
Honda Loop-Handle 25 cc HHT25SLTC |
|||||||||||||||||||||||||||||||||||||||||
Specifications
|
|||||||||||||||||||||||||||||||||||||||||
Description
|
|||||||||||||||||||||||||||||||||||||||||
ENGINE
|
|||||||||||||||||||||||||||||||||||||||||
Carburetor
Diaphragm type w/fuel pump
Idle_Speed
3,100 ± 200 RPM
Air_Cleaner
Semi-dry type
Engine_Type
Honda GX25, mini 4-stroke, OHC, single cylinder air-cooled multi-position (360°)
Displacement
25 cc (1.53 CID)
Oil_Capacity
80 cc (2.82 fl. Imp. oz.)
Bore_&_Stroke
35 X 26 mm (1.4 X 1 in.)
Fuel_Capacity
0.5 L (17.6 fl. Imp. oz.)
Cooling_System
Forced air
Ignition_System
Transistorized flywheel magneto (electronic)
Starting_System
Recoil starter
Recommended_Fuel
Regular unleaded gasoline (87 Octane)
Honda_Engine_Model
GX25
Lubrication_System
Oil mist
Maximum_Net_Torque
1.0 N.m (0.74 lbf-ft.) @ 5,000 RPM
|
|||||||||||||||||||||||||||||||||||||||||
FEATURES
|
|||||||||||||||||||||||||||||||||||||||||
Low-tone_muffler_for_quieter_operation
25_cc_Honda_GX25_OHC_Mini_4-stroke_engine
Electronic_ignition_for_dependable_starts
Multi-strand_drive_cable_that_absorbs_vibration_and_impacts
Includes_Semi-matic_(tap-and-go)_trimmer_head_and_shoulder_harness
Perfect_for_jobs_around_the_home_because_it's_powerful_and_lightweight
|
|||||||||||||||||||||||||||||||||||||||||
PRODUCT DIMENSIONS
|
|||||||||||||||||||||||||||||||||||||||||
Overall_Width
34.5 cm (13.6 in.)
Overall_Height
26.5 cm (10.4 in.)
Dry_Weight_(Without_Blade)
5.9 kg (13 lbs.)
Overall_Length_With_Cutter_Mounted
188.5 cm (74.2 in.)
|
|||||||||||||||||||||||||||||||||||||||||
ADDITIONAL INFORMATION
|
|||||||||||||||||||||||||||||||||||||||||
Line_Type
Quiet LineTM
Gear_Ratio
1.235 Input shaft: 1 (Output Shaft)
Handle_Type
Loop
Cutting_Width
43.2 cm (17 in.)
Drive_Shaft_Type
Flexible steel cable
Engine_Stop_Switch
Slide type switch
Anti-Vibration_System
Standard
Cutting_Line_Diameter
2.41 mm (0.095 in.)
Final_Drive_Gear_Case
Helical cut bevel gears / Sealed ball bearings
Throttle_Control_Type
Two-motion trigger type
Cutting_Head_(Optional)
Manual, pro-tap, semi-pro
Cutting_Head_(Standard)
Semi-matic line feed nylon (tap-and-go)
|